Heat Soaked Glass
Tempered glass can become thousands of small glass pieces without sharp tips once it is broken. Spontaneous glass breakage usually happens to tempered glass which has too much nickel sulfide. If there is too much nickel sulfide in the mix of raw glass, then extreme changes in temperature, wind or other stresses can cause Tempered glass (Toughened Glass) to have a pressure point and fail,spontaneous glass breakage happens before being installed in homes and on buildings – in some cases threatening lives and property. The glass can undergo Heat Soaked process after Tempering/Toughening to remove nickel sulfide.Although glass process cost would be higher, It is the preferred option-to bust in an oven-rather than to put up on building facades.The heating process can break any glass with nickel sulfide it in before it is sent out to the marketplace.
Two or more sheets of Tempered Glass can be laminated to be Laminated Glass or be combined to be IGU. If the glass is used to produce Laminated Glass, its flatness must be within control to avoid bubbles between two or more sheets of glass laminated.
Besides Heat Soaked Process,Tempered Glass can be processed with Hole, Cutouts, Polished Edges or in Irregular Shape. And it is popular used as Door & Window Glass, Pool Fence Glass,Balustrade Glass, Balcony Glass,Bathroom Glass, Shower Door Panel, Floor Glass, Sliding Door glass,Furniture Glass,Table Glass, Tempered Handrail Glass, Tempered Glass Facades, Green House Glass, Shower Cubicles Glass etc.
Heat Soaked Process is recommended to be done on Balcony Glass, Curtain Wall Glass, Glass Roof etc.
Size: Max. 2440 x3660 mm or bigger to be outsource
Certificates: AS/NZS 2208: 1996, CE, ISO 9002
Glass: Float Glass, Annealed Glass, Patterned Glass, Low E Glass, Low Iron Glass
Glass Color: Clear, Low Iron, Grey,F-Green, Bronze,Blue Etc
Glass Process: Hole, Cutout, Heat Soaked, Polished Edges, Ceramic Frit Glass, Irregular Shape
Package: Plywood End Cap, Plywood Crate, Metal End Cap,Carton Package, Pallet Etc.